Arri Skypanel S120 C

Arri Skypanel S120-C

The highly acclaimed ARRI SkyPanel series of LED soft lights is growing, with the new SkyPanel S120-C joining the S60 and S30 family of products. The S120 is twice as long as the S60, but weighs nearly the same. Its larger light aperture makes a great soft light even better. Retaining the same features and color tuneability as its smaller counterparts, the S120 consumes less than 400 watts, yet it is slightly brighter than the S60-C and has an outstanding efficacy of 90 lumens per watt.

A large surface area is a crucial feature of a good soft light. With an aperture of 1290 mm x 300 mm (50.8” x 11.8”), the S120 outputs a beautifully soft, even beam of light that has a wide range of uses. The long aspect ratio wraps light around objects and is perfect for vertical lighting of people. In addition the S120 works well as an overhead light for large areas, with the increased dimensions meaning that fewer lights and less cables are required.

Released alongside the S120 are all the accessories needed for sculpting and controlling the light. Among the S120 accessories are honeycombs, eggcrates, barndoors, diffusion panels, the SkyBender and a new fabric barndoor called the FlexDoor. This wide range of accessories makes the S120 more versatile and easier to control.

  • Lamphead S120-C

  • Optical System Soft Diffusion Panel

  • Light Aperture 1290 x 300 mm

  • Beam Angle 110° (Half Peak Angle)

  • Weight
    Manual Version:16 kg (35.3 lbs)
    Center Mount: 14 kg (30.9 lbs)
    Pole Op Version: 19.6 kg (43.2 lbs)

  • Handling
    Aluminum Yoke, High Strength Tilt Lock
    Pole Operation Option (Pan & Tilt)

  • Mounting 28 mm Spigot (Junior Pin)

  • Tilt Angle +/- 90º

  • Lamphead Voltage Input 48 V =

  • Power Consumption 400 W Nominal, 430 W Maximum

  • Lamphead Power ConnectionMale 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)

  • Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)

  • Battery DC Voltage Range 23 - 36 V =

  • Battery Mode Light Output 50% of Total Output

  • White Light 2,800K - 10,000K Continuously Variable Correlated Color Temperature

  • Colored Light Full RBG+W Color Gamut with Hue and Saturation Control

  • Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)

  • Color Rendition
    CRI Average > 95
    TLCI Average > 90

  • Green-Magenta Adjustment Continuously Adjustable (Full Minusgreen to Full Plusgreen)

  • Dimming 0 - 100% Continuous

  • Control On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A

  • Remote Device Management (RDM*) DMX Setup, Hour Counter and Standard RDM Commands

  • Software Interface:
    Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac
    USB-A: Software upgrade via flash drive

  • Housing Color Blue/Silver, Black

  • Ambient Temperature Operation -20 to +45° C (-4 to +113° F)

  • Protection Class IP 20

  • Estimated LED Lifetime (L70) 50,000 hours

  • Estimated Color Shift Over Liftetime +/- 5% K

  • Certifications CE, FCC; GS, cNRTL, CB

  • Power Supply Unit S60/S120 PSU

  • Power Supply Input Range 110 to 240 V ~, 50/60 Hz

  • Power Supply Output Rnage 48 V =

  • Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison cables available)

  • Power Output Connection Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)

  • Weight 3.5 kg (7.7 lbs.)

  • Dimension 383 x 192 x 90 mm (15 x 7.6 x 3.5 inch)

  • Control On-Board On/Off Switch

  • Mounting Super Clamp Attachement / SkyPanel PSU Rail Mount